In our daily use of sports wood floors, there are often bulging phenomena. The reason is caused by normal use and improper maintenance. The common two are edge bulging and layout bulging.
Edge bulge: There is an oval bulge on the edge of the sports wood floor board, a single bag appears in the middle of two sports floors, and some multiple bags exist in the middle of the two sports wood floors; some are connected together, showing irregular distribution in the room .
Drum bag on the board surface: There are oval-shaped bags on the board surface of the sports wood floor, and a single bag or multiple bags appear in the middle of the board surface of the sports floor at the same time, showing an irregular distribution in the room.
So what are the reasons for these bulges?
1. The ground is uneven or there are sand particles on the ground: Before the installation of the sports wood floor, because the ground is not cleaned, there are some small sand particles on the ground or the ground is too rough. The balance layer on the back was damaged, and the moisture from the ground caused the sports wood floor to bulge.
2. Improper handling of moisture-proof measures: This kind of situation belongs to improper moisture-proof handling during the installation of sports wood floors. On wet ground, if the moisture-proof membrane connection is not tightly adhered with waterproof tape, although the balance layer on the back of the sports floor is not damaged, because the sports floor has been in a humid environment for a long time, after the balance layer is eroded by moisture, moisture may still enter into the sports wood floor and damage the sports floor.
3. Improper use: The bulging phenomenon caused by the water in the joints of the sports wooden floor (such as: heating water running, large area water inflow, etc.), belongs to the user's improper use and maintenance.
Manufacturer's hotline: 13718418469/13811196760 Li Yong
